The L 5110 Evaluation Program LABODATA III is an user friendly program for statistical analysis, documentation, storage, and long-term evaluation of the test results from various TEXTEST instruments by means of an IBM compatible PC.  
 



 

The Gelbo Flex Tester with Particle Counting Chamber consists of two 82.8mm diameter mandrels, one fixed and the other attached to a moveable arm to perform the flexing action. The moveable mandrel twists and compresses the sample at 60 cycles per min of 180° rotation over 120mm of stroke toward and away from the fixed mandrel. This instrument is used to measure linting of woven and nonwoven fabrics, and pinholing / delaminations of plastics and films.  
 



 

The SnagPod is offered as an additional test chamber for a HEAL’S ICI Pilling Tester or a later generation Orbitor. The SnagPod, octagonal in shape, incorporates 4 snagging bars, fitted with pins, inclined forward with the direction of rotation. The Pod rotates at 60rpm. The test duration is 2000 revolutions and takes 30 minutes to complete. Four specimens are tested simultaneously.  
 



 

The Din Abrader is primarily for use in determining the resistance of vulcanised rubber to abrasive forces using a cylindrical type drum.  
 



 

This instrument is used for determining the thickness loss of textile floor coverings under dynamic load. The specimen is subjected to a cyclic-loading treatment in which an impact assembly, with two feet on its underside, repeatedly droops freely onto the specimen.  
 



 

The Thickness Gauge is used for measuring the thickness of underlays, using a standard mass applied to the Pressure Foot according to the table in the Standard AS 4288 to determine the Thickness.  
 



 

When it comes to measuring, correcting and matching color for thousands of products and product parts, there is no match for Konica Minolta. The full line of spectrophotometers deliver unprecedented accuracy, stability and ease of use for the control and reproduction of liquids, solids, powders, pastes and films that are used in industries ranging from food and automobiles to packaging and pharmaceuticals—and thousands more in between.  
 



 

VerVide Colour Assessment Cabinets (CAC) create the perfect alternative to natural daylight. With the use of nine phosphors and calculated to the CIE 51 standard, the cabinet produces the best flurescent D65 daylight simulator with the highest Colour Rendering Index (CRI) available to the colour viewing world. The CAC range had been developed for the visual assessment of colour in accordance with the British Standard 950 Part 1 directives and International Standards.  
 



 

This is a simple, predictive test typically used to assess the potential of white or pastel colored materials to yellow due to the migration of oxides. This test is specific to phenolic yellowing. Complies to AATCC, ISO, M&S, and TESCO.  
 



 

The Spray Test is a simple method to determine the resistance of any fabric, which may or may not have been given a water-resistant or water-repellent finish, to surface wetting by water.  
 



 

Used to determine the stability of fabrics and garments to washing and to investigate the effects of detergents and chemicals.  
 



 

Used to determine the resistance of different metals to corrosion. Complies to ASTM and other standards.  
 



 

Details: This machine performs two methods for determining the deflection force of flexible cellular polyurethane.  
 



 

This foam compression tester is ideal for determining the deflection force of flexible cellular polyurethane in both large and small sample sizes in the laboratory, or on the production line.  
 



 

The Cornell Type Mattress Tester has been designed to conform to the standard Cornell test method for evaluation of firmness retention and surface deformation of bedding innerspring’ and foundations. The procedure to perform this test is totally operational by computer after the operator has selected relevant specifications.  
 



 

This instrument gives an accurate measurement of the thickness to be the basis for accurate values of various properties of cellular materials such as density, tensile strength, tear resistance and compression set. This gauge is suitable for Method A of AS 2282.2, a test reference particularly applicable to dimensions less than 30mm.  
 



 

The Universal Testing Machine offers excellent accuracy and ease of use. It is strong and durable enough to withstand many years of use, yet it has a compact load frame that provides greater flexibility of placement. The IDM Universal Testing Machine sets the standard in Universal Tensile Testing. The load cells used in all IDM models offer one-touch zero adjustment, and load cell capacity discrimination guarantees accuracy, and speeds the setup process. This is particularly important when multiple tests are being performed.  
 



 

The Falling Dart Impact Tester covers the determination of the energy that causes Polyethylene Film to fail under specified conditions, with the impact of a free-falling dart.  
 



 

This instrument is used todetermine the coefficient of static friction of most materials by measuring the angle at which one test surface begins to slide against another inclined surface as the incline is increased at a constant and prescribed rate.  
 



 

The Hot Tack Tester is an advanced system for monitoring the seal performance of flexible and semi rigid plastic bags or tubes.  
 



 

The Ring Crush Test fixture is designed to carry out the ring crush test for paper and board having an average thickness up to 1000um, for the purpose of MD ring crush, CD ring crush, liner or fair side.  
 



 

This thermostatically-controlled cabinet is for determining the heat resistance of adhesives. Up to ten joints can be tested simultaneously. The heated joints are subjected to various static loads for 10 minutes and the amount of peel separation produced is a measure of the heat resistance of adhesives.  
 



 

The Pail Measuring Instrument is manufactured with two recesses, one for 10 to 20 litre pails on the left-side, and 1 to 10 Litre pails on the right side. The pail is placed in the measuring recess of the unit, the operator can switch a toggle switch to activate measuring on either one of the measuring recesses. The measuring band contracts via a pneumatic cylinder to a pre-determined pressure, set on the regulator. The instrument will display the measurement in mm once the cylinder has stopped moving.  
 



 

The TEXTEST L 5700 Package Hardness Meter DUROMETER is used for fast and convenient determination of the hardness of paper rolls, plastic rolls, warper beams, yarn cheeses, fabric packages, and many more. Due to its unmatched measuring accuracy the instrument is perfectly suited for package hardness tests in warping, spinning, winding and dyeing. Since at a given geometry the package hardness correlates very well with the package density the instrument is also well suited for determination of this important parameter.  
 



 

The TEXTEST FX 3750 Digital Elmendorf Tearing Tester is a microprocessor controlled falling pendulum Instrument with digital display for determination of the average force required to propagate a single-rip tongue-type tear starting from a cut in paper, cardboard, plastics, non-wovens and woven fabrics.  
 



 

HEAL’S Elmatear simplifies and accelerates routine tear testing. The operator selects the unit of measurement and the number of plies – the test result is displayed digitally – no calculations are required. The intelligent design diminishes the scope for operator error to ensure accurate and repeatable results. Cumbersome pendulums have been replaced with easy-to-change, manageable pendulum weights.  
 



 

This extremely easy to use instrument has been manufactured to determine the static and kinetic friction of plastic film, sheeting and paper and other sheeted material. The coefficient of friction (COF) is a number which represents the friction between two surfaces.  
 



 

The TEXTEST FX 3000 Automatic Hydrostatic Head Tester HYDROTESTER III is used for fast, accurate and automatic determination of the resistance of plastic foils, coated and uncoated fabrics, and non-wovens to water penetration by means of the dynamic test method, the static test method, and the program test method.  
 



 

The new Titan Universal Strength Tester comes from a family of innovative equipment, designed and manufactured by James H. Heal – the World’s Premier Textile Testing Equipment Company. Drawing on the experience and resources of a company that has achieved ISO 9001 accreditation, Titan sets radically new standards in versatility, productivity and simplicity. Titan complies with the latest international textile standards and the software’s inherent versatility enables revised or new standards to be easily incorporated as they evolve.  
 



 

The inherent flexibility of TruBurst enables testing of a broad range of materials from the textile, non-woven, paper, board and plastics industries.  
 



 

The TEXTEST FX 3250 / FX 3255 Automatic PICK COUNTER is used for fast, convenient and accurate determination of the thread density of woven fabrics and wire meshes as well as the loop density of knitted fabrics.  
 



 

The TEXTEST Moisture Meter L 5800 DRYMETER III is a compact hand-held instrument for fast and convenient determination of the moisture regain in fibers, yarns and fabrics. The instrument provides for direct and instant test results for 19 of the most commonly used textile materials and blends.  
 



 

The Drying Cabinet is used for the rapid drying of textile samples. The cabinet is fitted with 12 dowel racks to support the samples on, and three door racks.  
 



 

The Crease Recovery Angle Tester is used to determine the recovery from creasing of a horizontally folded specimen by measuring the angle of recovery. It is particularly applicable to fabric types which demonstrate a propensity to creasing such as cellulosic and other woven apparel where a measure of crease resistance is desirable.  
 



 

Measures pH and temperature. Automatic temperature compensation via pH combination electrode with integrated temperature sensor Fully automatic two-point calibration with technical buffers. Clear multi-function display and user guidance. Integrated memory for 50 measured values. Dust and water-tight housing 5000 hours operation using 4 standard batteries